Print Prices

Our print finish service has several options with the leading option being DTF heat transfer. This process allows for the highest possible resolution and finish of any image on most garments.

Our print and transfer application charges:

• Standard Chest Logo £3.00
• Standard Sleeve Logo £3.00
• Standard Large Back Logo £5.00
• Standard Large Front Logo £5.00
• Standard Nape of Neck £3.00
• Trouser and Skirt Pockets £3.00

*Other options are available upon request, please call or email to discuss.

The benefit of the DTF process is the flexible positing of logos or text, and lower cost base on smaller runs. It also allows for near accurate photographic reproduction on any image or logo but be careful not to have too large an image that could affect the garment feel.

DTF can allow logos to be positioned in different places, from chest to back of garment to sleeves, to hoods on jackets, to rear of jackets and so on, all with high quality images. 

The process of DTF can mean more logos on garments at much quicker speed, so if your need if for volume logos or several logos across many garments, then the DTF process is the ideal solution.

Artwork files supplied by you to us, must be of high quality to enable our standards to be maintained, therefore we ask that all artwork is supplied in the following formats:

• .eps
• .pdf
• .ai
• .cdr

and must be the latest versions to match with our own software. If your logo or image or text is below certain limits, we many have to increase font size and other changes to enable the best reproduction of your logo, image or text. If this happens, we will send you any changes for approval first. If your logo or image is too complex for vinyl print, we may recommend other options and solutions.

We can except j-peg files if that’s the only file type you have, but we can only print colour (s) that are set within the j-peg file. Where possible we can replicate your pantone colour requirement if you can or do provide the pantone numbers, to enable your print finish to exactly meet your requirements.

Print set up cost is £8.95, but if the order is above 20 items, this charge is waived.

If the artwork supplied is not of suitable quality, then we can offer our design services to bring artwork to the required standard for a fee of £150.00, we will then send you your updated artwork file for your approval before we undertake any printing.

The placement of any DTF logo onto garments may not be exactly the same on each garment and for each image, but the visual difference will be minimal

Our Do’s and Don’ts - what we don’t do and what we can do

Please see below our guidelines for DTF printing

• We can do a 48 hour turn around on bulk print orders over 200 garments and logos, subject to order confirmation.
• We can do same day service in some cases if your order is less than 100 logos and garments.

The serious bits:

Please Note: if you purchase any garment from JFM workwear range and have requested or uploaded artwork for logos or images, please ensure that all artwork is your own original work. Artwork that could or may infringe any copyright or intellectual property issues, may be refused. JFM Workwear will not be held responsible for any Copyright or Intellectual Property infringement with and for artwork supplied by 3rd parties.

When washing and ironing any garment, the washing instructions will vary depending on the type of print option used. Whilst we strive to use only the highest standard of finish, please ensure that you check with us first on the print option required for your garment, as the importance of this effects both the washing instruction and any ironing instructions. Always follow the garment washing and ironing instructions on each garment label. JFM Workwear will not be held liable for any damage to logos if the washing and care instrauctions have not been followed.